Standard Container 6.00 x 2.43m – New Office

The advantages of choosing our office container:

Rapid installation: Your container arrives ready to use and can be quickly installed on-site.
Mobility: Move your office wherever you want with our transport solutions.
Cost-effective: An economical and flexible solution for all your workspace needs.
Environmentally friendly: Our containers are made from recyclable materials and are built to last.
Additional information

Soil structure:

Blind floor: 0.5 mm T14 trapezoidal sheet metal, riveted to the floor joists

Insulation: 100 mm mineral wool, 0.2 mm vapor barrier

Base plate: OSB panels, screwed onto profiled steel beams

Flooring: 2 mm PVC with skirting board, glued over the entire surface, marbled grey colour pattern.

Permissible floor load: 3.8 kn/m

Wall structure:

Profiled sheet metal: 0.5 mm T8 trapezoidal sheet metal in RAL 7016 (anthracite) – other colors available according to customer wishes at an additional cost.

Insulation: 50 mm mineral wool, up to 100 mm depending on customer requirements

Interior lining: 16 mm laminated panel, white.

Vapor barrier: 0.2 mm – membrane

Roof structure:

Profiled sheet metal: Trapezoidal sheet metal 0.7 mm T35

Insulation: 100 mm mineral wool

Interior lining: 16 mm laminated panel, white.

Vapor barrier: 0.2 mm – membrane

Water drainage: water is drained through PVC pipes in the corners of the container

Window:

1 piece of plastic window 2.00 x 1.20 m with insulated glazing, tilt-and-turn hardware and plastic roller shutters

2 plastic windows, 2.00 x 1.00 m, with insulated glazing, tilt-and-turn hardware and plastic roller shutters

Door:

Exterior door: Door ZKI60, RAL7016

Dimensions 900 x 1970 mm,

Electrical installation: VDE standard. Electrical Standard

CEE 380V/32A/5-pin outdoor sockets. Lighting – 2 x 50W LED lamps, controlled by an on/off switch, sockets, a control box with the appropriate number of fuses and IF circuit breakers.

The electrical installation is recessed.